Tuesday, 25 March 2014

Behind the Scenes

More significant and in depth posts are coming (props and sets), but it's been too long since an update, so here are some behind the scenes shots I took with my phone, some of my lighting set ups I was particularly proud of... and/or needed the photo to reference where I put them. I had NO experience with lighting prior to starting this film so it's been a ton of fun figuring it out and learning as I go.

Lighting got pretty damn precise during some scenes, I used this cone to put a spot just on a portion of my character's chest to lighten up a shadow. If I did it right no one will notice... and I couldn't have this setup go unseen!


I love the "anything goes" mentality of stop motion, you can see my little flash light being anchored down with a little vaseline bottle to get just a bit of light on those foreground elements.


Definitely the most complex shot of my film, it involved a walk throughout the shot as the camera moved on 3 different axis with the focus changing, and then as the forest is revealed, an average of about 5-10 mouth shapes were swapped each frame. Definitely am proud of how it turned out though!


The last day of shooting my "room" set. You can see the container holding the "small" mouths for the trees. There will be more on those weird trees soon...


Just a really serious down shot, had to attach a mirror to the salon to read the numbers for the camera pan.

Friday, 3 January 2014

Projectorcycle


Here you can see what is one of the most important props in the film, the projector-stationary-bike thing. I'm really happy with how it turned out, and it only really took a couple days, all be it... long... long days. The light bulb in this photo is temporary, the light bulb in the final film is an eyeball, but it will be made too look much better than this crudely drawn sharpie one.


I wish I took earlier progress photos, but here you can see the individual parts, almost everything is made of cardboard and vinyl tubing found at home depot, with a few sculpy pieces as well. You can also see the LED light that I have running through the bike's frame.


here you can see the bike constructed, with sculpy details added on. It's already got a layer of paint, but this was right before the final coat, so you can see some parts have been masked off. I found this awesome paint at Walmart that gives the effect of hammered metal, which was perfect for what I wanted.
Some gel texture paint and dry brush was added to give it a more worn, rustic metal look...

The film reel wheel was spray painted with a plastic spray paint then dry brushed to give it those scratch like looks. Still need to add the film on this reel though. Both the front and back wheel rotate as well.
The pedals are bits of sculpy with magnets inside them, so they will stick to the puppets feet. They also rotate at all the points a normal bike pedal would. You can also see the wiring coming out of the back of the bike here, this will be hidden in the final film.

The seat is made of foam and fake leather, that's been scratched and sanded to make it look worn out.



And there you have it! One projector bicycle.




Saturday, 28 December 2013

Puppet head

This post will just go in to a bit more detail about the puppet head, I won't post any steps because the Joshua Flynn's blog already has a great step by step guide that I followed here. So if you're interested in making something like this yourself just head over there! Making a head with replaceable features is definitely hard work, and knowing how hard it is now I'm not sure if I'd choose this method again, but it just looked like so much fun and the end product looks so slick that I couldn't resist trying. The mouth and brow pieces snap on and off with magnets, and it's just too fun to switch them.



Here you can see my first attempt at the head, unfortunately I took it all the way to casting before I realized that the face pieces fit too loosely on the main head. As a design choice, I emphasized the gaps between the facial features instead of trying to hide them and end up a line running across the character's face (since I wouldn't want to edit it out in post), however I didn't realize at the time that this would make the pieces be able to tilt side to side, especially because the main head piece was just a smooth curve...so when I tried some pieces out with the magnets that secure them, they shifted, meaning the face would jitter a ton when it came to animating... so I restarted:



This time around I reconstructed the main head shape so that the mouth pieces fit snugly in place, and the nails in the mouth/forehead pieces that attach to the magnets had more plastic to be adhered too.They don't even really need the magnets, but they definitely don't hurt.

The neck was an interesting endeavour, since I didn't want any seam between the head and the neck, the neck and back of the head are one piece of silicone, with the armature running through it. The main plastic head piece then slots into the neck and back of the head. 


here you can see the molds and the face pieces, with sculpy expressions sculpted and baked on, ready to paint.

And the final product! More professional looking expression pages are to come, but here you can see me messing around with different angles and filters, since the film will largely be in black and white.


 


 




Monday, 23 December 2013

Alarm-clock Helmet

Unfortunately I forgot to take progress photos of this, but here is the alarm clock/helmet that will sit on top of the characters head. The "cork" part at the bottom pops off so it will look like it's inserted inside the head, when really there is just a k&s tube that slots in to the top of the head. The hands on the clock move, the bell will shake side to side, and the hammer and wrench move in and out!

Since this is added weight on the puppet, it was made to be as light as possible, everything you see is either made of cardboard or polyurethane foam, except the bell and the heads of the tools, which are small bits of sculpy.


Sunday, 22 December 2013

Picture Frames


Here are some photos of the picture frames which will hang on the wall behind my character...


They are quite easy to make, the basic frames were cut out of foam board, and split down the middle to allow for the "glass" to be a little bit separated from the photo, just like a real frame.




Then it's just a matter of spray painting them black. Glass was made from the plastic that comes with most electronic packaging, then sprayed with spray adhesive and dusted with baby powder, to give it that worn and dirty look.



Add some dry brush and voila! Now printed photos will be attached to the backs of these, and they will be hung on the wall.

Saturday, 21 December 2013

Thesis Film Puppet

  Wow so it has been forever since this blog was updated, but I figured it's time I start up again, and what better way to do so then by making a huge post on my 4th year films puppet! So without further ado... here it is! about 90% complete that is... Still needs finger nails and some dry brushing on the hands/back of the head.


I need to give a LOT of credit to the amazing blogs of Nathan and Joshua Flynn, as they posted some incredibly detailed tutorials/progress posts that I followed for most aspects of the puppet, with some variations to fit my films needs. Instead of walking you through my process you should head over here: http://nathan-flynn.blogspot.ca/2011/03/character-armatures.html#.UrXls_RDvHR if you're looking to make one of these bad boys yourself. I'm just going to toss in some of my advice based on issues I came across.

Here you can see the laying out of all the pieces for the armature, in order to get the k&S tubing to slot together, hammer tiny bumps into the larger pieces and they will fit nice and securely, just don't over do it or the smaller pieces won't fit inside at all.

 Here it is after assembling everything and securing all pieces with epoxy. To get the wire to sit nicely, I found that putting some epoxy putty inside the tube, then inserting the wire, then sealing it with crazy glue worked great. Epoxy adhesive works really well too.

 I wish I took a picture of the puppet bulked up with upholstery foam, but here are the beginning stages of bulking. polyurethane foam is used for more solid pieces (ribs and hips). It's a very good thing I made all these pieces replaceable too, as it turned out that the legs and anles of this puppet weren't strong enough to support his body when one foot was hovering off the ground, so I had to whip up some new ones. Once you get the hang of it making replacement parts can be done pretty fast too, I was able to make an extra set of legs, feet, arms, and 3 sets of hands within a day.


A shoe. Yet to be polished/painted. These new feet have two magnets in them for extra support, one in the heel and one in the toe, with a joint in between for hopefully more realistic walks.

So there it is, I'm going to be updating this blog frequently with all things film related, and probably go into more detailed posts about this guys head and clothing. I've got a whole phone full of photos, it's time they saw the light of day.